These polished 304 stainless tips were created specifically for the SSR by Simple Engineering. They are specifically designed to fill the SSR rear openings without risk of melting the fascia. The outer shell of the tip stays cool because of the open back side of the tip.
They are slash cut at 15 degrees, similar to the OEM tips, but do not have a rolled rear edge. The tips are polished both inside and out to a mirror finish. The tapered inner part of the tip looks like a megaphone….. yes, it will change (just a bit) the sound of your SSR…. but only to the rear. There is no appreciable sound change in the passenger compartment.
The inlet pipe to the tip is already stretched enough to slip over the OEM 2.5″ tailpipes for a “weld-on” application. The inlet is long enough to allow you to weld to the OEM pipes and have the tip sticking out about an inch and a half…. or the inlet can be shortened to allow for a flush fit…. The last curve of the tailpipe (before the tip) is the reason that you may have to cut the inlet to the exact length you need.. All this can be done by any competent muffler shop.
One of the pictures in the gallery is with the stock tip dropped inside the 5″ tip….
🔊 Click on the “Listen” tab to hear how much they improve the sound of the ’03/’04 and ’05/06 SSR’s stock exhaust!